404 Not Found

OUR SERVICESThe Ducted Air Conditioning System is highly different from the split or ductless air conditioners and are greatly used in big houses and buildings like offices, shopping centres or commercial stores

It involves a central conditioning unit to regulate the air temperature and pressure and send it to different rooms or locations through a system of ducts.

Key Components of a Duct System are:

Vibration Isolators: This is a piece of equipment used to suppress the vibration and noise from the mechanical systems. The air handling unit installed in the duct system can create a lot of noise and disturbance , and so the vibration Isolators are essential to reduce the noise especially in a place like offices

Volume Control Damper: is an essential part used to control and balance the airflow in the duct system. It is used to regulate the flow of air and the pressure inside the air duct and maintain a balanced level of temperature and humidity corresponding to the outside temperatures.

Take-offs: A duct has different branches each going to a different location called take offs. The air from the main trunk of the duct is carried to individual branches through these takeoffs to ensure a smooth air flow

Smoke dampers: Smoke and fire dampers are used as secondary protection controls for a building. They predict any smoke or fire in the building and close after the detection of smoke or fire, to stop them spreading in the air ducts and vents.

https://kpa.sg/wp-content/uploads/2021/11/common-kitchen-exhaust.jpg

4 generally used types of Aircon Ducts are:

Fiberglass Lined Air Ducts are generally installed in the HVAC system. These ducts are useful for reducing and dampening the excess noise. These are also useful in providing a layer of insulation to the inner or outer part of the duct to prevent air leaks and condensation

Fiberboard Air Ducts: These ducts are made from Inorganic glass fibres bonded with resin and formed into boards. The outer part of the board is covered with foil and is 1- 2 inches thick.

Sheet Metal Air Ducts: These are the most common and widely used type of duct. They are made of Galvanized mild steel or aluminum. These are easy to work with as they can be cut, bent,or moulded into desired shapes easily. Due to having a non porous surface these ducts are resistant to mold growth and bacteria and are much more durable.

Flexible Air Ducts: This duct system is very lightweight and can be used to small spaces or houses with limited spaces. They are comparatively inexpensive and easy to install. It is made with a light metal shaped into a spiral or helix structure and as the name suggests is flexible in structure. These ducts have a low support structure and are much less durable.

A system of registers and grilles are used to push air to the rooms (registers) and transfer the hot air outside (grilles),and are an important component of the Air conditioning system to ensure a proper air flow throughout the building.

Similar to other mechanical and electrical systems the ducts and other parts of an Air conditioning system these a regular preventive maintenance and care so that it uses lesser amount of heat energy and provides efficient working.