404 Not Found

nginx/1.24.0
TDF Corner Piece - KPA

TDF Corner Piece

OUR SERVICESTDF corners are used to install and crimp transverse duct edges and attach the corners securely in place.

These tools bend the flange over the inserted corner in a uniform manner so that they remain in place.

TDF corners are used to reinforce the bond between ducts and fittings. A TDF or Transverse Duct Flanges is a system of flanges, which helps in connecting the pipes, valves or other metal fittings. These are then sealed and bolted using gaskets. A TDF (slip on flange) system consists of flanges on the duct ends which are rolled onto the duct, providing it with insulation and an internal seal to the edges of the ducts. The TDF is a 4-bolt duct connection system and has a hem on the flange to the inside of the structure. Its flanges connect to the duct and thus are of the same flange profile and material as the duct.

A TDF system has a very accurate profile of fittings and has a closeted groove on the flanges for proper gasketing. It has accurate fitting and interlocking of hems and is extremely flexible to use

TDF corners are generally designed for manual attachment on TDF connections and are usually:
  •  Manufactured from 16-gauge steel.
  • Have varying Specialty metal gauges
  • And, the Nuts and Bolts are sold separately
  • The Stackable TDF corners are mostly used for corner insertion machines
  • Manufactured from 16-gauge steel and are designed for use on TDF connections.
  • These can be available to you either as Stacked or Unstacked TDF Corner
  •  Nuts and Bolts are sold separately

Call 123-456-888 anytime... day or night
for free estimate!

AVAILABLE 24 HOURS
LICENSED & INSURED
WARRANTY & MAINTENANCE
https://kpa.sg/wp-content/uploads/2021/11/HTB1zMmNXizxK1RjSspj763S.pXaC_.png

TDF corners are an integral part of the clipped ducting, in which the duct system made out of metal has a rolled out hem and edges are turned out to easily connect one duct edge to the edge of the other duct. A duct clamp is used for the purpose of quick clamping of the ducts to provide a quick and simple assembling of the parts. This gives the ducts a smoother design, an extra insulation and are very easy to install and work with.

So, These corners will ensure a tight and rigid duct fitting.

They are simple to install and work with all types of rigid air ducts, making installation a breeze.

These corners are strong and long-lasting, and they have a locking mechanism that contributes to the rigidity of the air duct.

Scroll to Top